Hello happy crafters. Welcome back to my blog. I hope you have had a splendid day. Today I have another set card based on a colour scheme. Enjoy!?
For the two cards using Spellbinder's Blooming Rose Dies. I die cut 2 set of the petals and 2 sets of the leaves using 80 lb cardstock. I also stuck with the same sentiment and colour scheme of pink, grey and gold.
For my first card, I used Picket Fence Studios LIFE CHANGING BLENDER BRUSH to colour each of the petals with Raspberry Distress Ink. I coloured the tip of the petals darker and the centre lighter for the smaller 3 petals where else the centres darker for the larger 2 petals. After the petals air dried, I curled the first 3 smallest petals inwards and then the other 2 larger petals outwards. I used Gina K's Liquid Glue to adhere them all together in the centre, making sure that the petals alternate with the petals below them. To finish off the flower, I added some grey mixed size bubbles in the centre with a generous amount of Cosmic Shimmer Flake & Glitter Glue. The leaves I coloured, in the same manner, using Iced Spruce. After allowing the leaves to dry, I bent them a little on the scoreline and added a little more colour to the edges.
I continued by stamping a happy birthday greeting from Kelly Creates TRACEABLE QUOTES with Iced Spruce Distress Ink 3 times in order to get a solid image, I allowed a few minutes between each stamping to allow for the ink to dry so there is no bleeding.
After this, I worked on the background. I wanted a thin gold frame but felt a cut out would be too distracting. So I used some painters tape and made a rectangle with my nesting dies as a guide. I then painted the space between the painter's tape with gold paint. Unfortunately, because I didn't press the tape down firmly, there were gaps in the tape and some of the paint got under the tape. I removed the tape and added gold ink splatters to the card in my splatter box which is just a box from a random delivery which I keep specify for ink splatters. I have another box for adhesive sprays.
Lastly, I arranged the big leaves and glued them down with liquid glue before moving to the smaller leaves, I saved some leaves to add after the flower was adhered.
For Card 2, the flower was made with Iced Spruce Distress Ink and all the petals curled outwards at varying intensity. For the flower centre, I used 2 pink omber flower stem and had to pierce a hole through the middle of the flower. Therefore when I was applying glue I made sure to add them to the side, instead of on the middle of the flower.
For the background, I started by using an antistatic powder to remove static from the paper and used Versamark Clear Embossing Ink to emboss happy birthday with Rangers Super Fine Clear Embossing Powder. I used the smooshing technique where I place the Pink Raspberry Distress Ink on my Tim Holtz's Media Mat and then lightly mist it before bringing the paper to the ink and pressing firmly on it then lifting. I repeated this process until I was happy with the result. I carefully wiped off any excess ink on the embossed area using a paper towel.
I used the Hero Arts Nesting Rectangle Dies to cut out a thin frame from black cardstock and added on at an angle. I then added some gold splatters in my splatter box. To finish, I added the flower and leaves to the frame.
For the 3rd card, I started by using an antistatic powder to remove static from the paper and used Versamark Clear Embossing Ink to emboss happy birthday with Rangers Super Fine Clear Embossing Powder.
Then I used the Picket Fence Studios LIFE CHANGING BLENDER BRUSH to apply Pink Raspberry Distress Ink to the middle of the card, the embossed sentiment will resist the ink. When I am happy with the intensity of colour around the sentiment, I used a tissue to buff the embossed sentiment to remove any excess ink. I then added some splatters with the same colour. I added a thin stript of gold mirror washi tape to the left side of the card to add some interest and make the offset of the sentiment look less noticeable.
To make the focal points, I used Gold Nuvo Drop to make two dots and used a toothpick to drag them from the centre on the drop so they meet and make a heart shape. I let the Nuvo Drops dry for a whole day before handling the card.
Hello happy crafters, hope you have been busy crafting and making beautiful things. As for me, I made this. I got my order from The Ton and was sooo excited. I love their classy approaches to life. Especially their shoe stamps. If you like the card you see, keep reading to see how you can make one for yourself.
These are the supplies I used, the stamp is from THE TON Couture Design, 2 embossing powders from HERO ARTS Sparkling and RANGER's super fine Gold. I also use ZIG real brush pen in black, HERO ART Unicorn White pigment ink, an acrylic block and a curved border die not shown in the picture.
To keep the supplies to a minimum I shied away from embellishments but if I were to give this card to someone, I would definitely be adding some bling to it. Maybe some gems or sequins, just to up the gleam a little.
Hope you enjoy my little tutorial. See you soon. Enjoy your lovely day.
Hello happy Crafters, hope you are having a cooler day than I am while I was making this card. I live in Melbourne and it has been HOT out here lately. 38 degrees today!! I needed something blue and cool to look at. So I made a mostly blue card with a hit of copper using my favorite medium, water colours! I have hear many crafters talk about having difficulties finding inspiration for masculine cards and I thought I will steer the card in that direction today. Hope you love it.
To make a water colour card, you need suitable watercolour paper, I choose THE PAPER MILL 300gsm art journal watercolour paper as I knew I won't be using too much of water and I am not doing too much of layering. It is a good weight and has medium texture exactly what I needed for this card as it gives texture without me doing anything.
I used an embossing folder I got from CRAFTONLINE, unfortunately, there is no brand name on the embossing folder itself, so I have no clue who it belongs to. If you do, drop me a message in the comment section. I liked the hanging floral image and who says men don't like flowers. I used my SIZZIX Big Shot and a tan embossing mat to emboss the paper. I had to run it through a few times and remove an extra tab so the sandwich was not too tight which would have caused the paper to crack or tear.
After I was satisfied with the depth of the embossing, I used a SPELLBINDER's die to cut out a part of the embossed image. I also trimmed the whole embossed image down so that it would fit an 4 1/2 by 5 1/2 inch size white card base while leaving a medium size border. I positioned the die to the right and not in the middle to make it a little more interesting.
To watercolor the card, I use GANSAI TAMBI watercolours. I mainly used the blues, a little bit of black, some of the copper and some of the white to make splatters. I have a colour palette on the right which shows me what the colours look like after it has dried and how transparent they are.
While I was making splatters, I accidentally made a boo-boo on my card as seen on the left. so to mask it, i just made it look like a leaf. I used a water brush and used the same colours and added another leaf on top of it to make it look more intentional. We all make boo-boos, just learn to include them in your design. In the end, this is how the water colouring turned out to be. Any part of the flowers which were squashes in the processes where revived when I ran the whole piece through the embossing folder again after it had COMPLETELY dried. DO NOT emboss wet paper, it will tear and you will be sad!!! Speaking from experience.😢
I used MY FAVORITE THINGS Essential Sentiments on SIMON SAYS STAMP After Midnight cardstock. I clear embossed with RANGERS fine embossing powder. I preheat my heat gun before taking it to my paper to reduce warping of the paper. I was not sure which sentiment to use so I made 3 and there are photos of the card with each of the sentiment below.
The 2 other sentiments I use most from this set. A really good set to have, especially for beginners or if your are on a tight budget.
The embossed part on the white did not photograph well, but you can see it in the picture below the slideshow. To put it all together, I used double sided tape to adhere the water colour panel to the white card base, added some foam to raise the white embossed area and added the sentiment with some liquid glue from GINA K DESIGNS.
Thank you so much for spending your time with me. I hope the tutorial was helpful. Sent me any questions you may have about the project or if you decide to make something similar, send me a picture. I would love to see it. Do consider to subscribe if you would like to be notified of new post. Till then, happy crafting.
Happy 2019 everybody, hope you have had a blessed year so far. Two months have gone by and 10 more beautiful months to go. Lets get to the exciting bits, shall we?
I am delighted to be apart of “DT for A Perfect Time To Craft” design group and as part of my first challenge, I chose the image “determine” from Sheepski Designs Digital Images & Art. If you would like this image and more, click here.
Rock climbing is always something I love to do and thought it was a fantastic image to start my digital journey. After purchasing, you can download the image which came in a .jpg format for me. I then used my Paint 3D on my Windows laptop to edit the image before printing it out on my ancient monochrome Brother printer.
For the first card, I scaled the image to be 3.5 by 2.5 inches. I used Zig Real Brush Markers to colour the boy and some rocks in the image before fussy cutting them out leaving out the rocks he was holding on to. Next, I use the Bold Alphabets Die by Altenew and cut out letter "s", "ï", "n"and "ë". I used a craft colour card stock sized at 1.75 by 8 inch and aligned the letters using the grid on my Tim Holtz's glass mat then adhered it with Gina K's glue.
I used foam tape to pop the craft cardstock up and stuck it to a 4 x 8 inch white card base. I then glued down the boy before finding the right spot for each of the rock cutouts. To finish it off, I used a sentiment, You got this from Simon Says Stamp and a strip of gold mirror cardstock to add a little shine to this masculine card.
For the second card, I resized the image to be roughly 5 x 4 inches. I used the same method to edit and print the image. I then used Zig Real Brush Markers to colour the image. To make it interesting, I drew 2 lines using a T-ruler across the image, creating a 2 inch gap. I then cut along the line and along the picture to create a partial die cut look.
For the card base, I made a 4.25 by 5.5 inch card, then used the lines on the image to cut out matching horizontal lines on the card. After that, I used Gina K's Liquid glue to adhere the top part of the image while lining it up to the cut lines on the card base. Then for the bottom part of the card base, I adhered the remaining cardstock to ensure the feet area of the image is sturdy. I then cut the excess cardstock off.
To finish off the card, I used 2 sentiments from You got this from Simon Says Stamp. To add some bling, I used a two -way glue pen to add glue to the harness and allowed it to dry. When dried, the glue is tacky, I then used Heidi Swapp gold foil to complete the card.
Also don't forget to check out the other wonderful ideas by my team members by visiting https://www.facebook.com/aperfecttimetocraftchallenge/. Looking forward to reading your lovely comments.
Thank you for taking your time to visit my blog.